I spoke with my contact at Camco regarding the Power Grip Generator Adapter # CAM55422 referenced in your question. He stated that the adapter features 6 gauge wire and 8 gauge for ground.
This is a very nice 125-Volt adapter cord that will convert your RV's 50-amp power plug to work with a 30-amp twist-lock outlet on a generator. I have attached a short video demonstration on this product that you can also check out. view full answer...
If you are wanting an option made in the USA I recommend the Mighty Cord Replacement Hardwire RV Plug - Male End - 50 Amp # A10-P50VP. view full answer...
The Mighty Cord 50 Foot RV Power Cord Extension w/ Finger Grip Handle - 50 Amp # A10-5050EH referenced in your question is constructed of heavy duty 4-wire 6 and 8 gauge wires. This is a 125/250V cord with a female plug that will connect to the 50-amp plug on your RV power cord and a male plug to connect to a 50-amp outlet on an electrical box. view full answer...
The Power Grip Generator Adapter for RV Power Cord # CAM55272 uses 10 gauge wiring for each prong. This is more than thick enough to handle the power capacity over the 12 inch length of the adapter. view full answer...
All of the pins on the Power Grip RV Power Cord Adapter # CAM55185 will be active. There isn't a single pin that is used with this adapter. view full answer...
The SmartPlug Replacement RV Power Inlet and Connector, # SM96FR has an inlet gasket made from neoprene and the ribbed connecter gasket is silicone. This is a replacement 50 amp inlet with triple weatherproof seals and a multi-point locking system that ensures a solid connection. The included connector wires to your existing power cord. view full answer...
The Mighty Cord Replacement Hardwire RV Plug - 50 Amp Male # A10-P50VP is stamped "Made in China" because it's made in China. That doesn't necessarily reflect poorly on the design though, as you can see with the positive reviews we have on our site.
All of our other wiring manufacturers are made overseas as well so we won't have an American made option although a lot of the manufacturers are based in the US (like Valterra/Dometic who owns the Mighty Cord line of products). view full answer...
The Mighty Cord RV Power Cord # A10-5025ED90 is made in China. Don't let this discourage you though. This is a well built and sturdy power cord and I have not had any issues with their products brought to my attention.
That said, if you are looking for American made products, we do have the SmartPlug line available. The SmartPlug RV Power Cord # SM86FR would be the most similar to the Mighty Cord you were looking at, but SmartPlug uses a proprietary male port so you would also need to... view full answer...
The Mighty Cord Dog Bone RV Power Cord Adapter part # A10-1550 has pins which are made of brass. The reason they are more silver in color than the yellowish color you are accustom to is because they have nickle plating which helps prevent tarnishing and discoloring. view full answer...
The 30 amp SmartPlug RV and Marine Power Inlet and Connector, # SM67FR that you linked to is made from highly polished Marine-Grade 316 Stainless Steel. The electrical pins are nickel-plated brass for maximum conductivity with the internal electrics being fully encased in thermal epoxy. This makes them 100% weatherproof.
There is also a durable plastic option in three colors, # SM77FR for white, # SM27FR for black and # SM87FR for gray. All are Made in the USA. Please note the linked... view full answer...
The Camco RV Power Defender Voltage Analyzer # CAM55310 referenced in your question does indeed feature a weather-resistant housing that will protect it from the elements.
This voltage analyzer will plug into a 30-amp receptacle at an RV park to test for improper wiring. The diagnostic lights on the unit will indicate any faults before you actually connect your electrical cord, protecting your RV. I have attached a short video demonstration on this product that you can also check out. view full answer...
Part # CAM39422 plumbing adapter is made of plastic. It attaches to a 3 inch threaded pipe on your RV so you can connect a hose that uses the standard bayonet connetion.
I've linked a video for you to take a look at as well. view full answer...
If you got something like this Adapter 7 Pole to 4 Pole with Tester # 47345 you will be able to convert your 7 pole to the 4 pole you need to power your light # CR-007G, you can also test to see if everything is working. If everything is, I think you may have an issue with your wiring with your factory 4 pole. You may also want to check your fuse box for a blown fuse. Also try to check your factory wire connection under your truck bed. view full answer...
The RhinoEXTREME RV Sewer Hose w Swivel Fittings # CAM39861 referenced in your question is both black and orange in color.
This is a 15 foot long sewer hose that includes a swivel bayonet and elbow fittings, a 4-in-1 adapter, locking rings, and storage caps. The 3 inch diameter hose will fit all standard sewer hose fittings. I have attached a short video demonstration on this product that you can also check out. view full answer...
The two brands we currently carry for 30 amp pigtail RV power cords are Mighty Cord # A10-3025END and Epicord # 277-000146. Epicord uses a PVC material for the outer casing of their cords and Mighty Cord uses a material they called STW (Standard Thermoplastic Outer Jacket) and would not further elaborate what it was composed of.
Having handled both brands before I can say that they're really isn't much of a difference between the two besides Mighty Cord's casing having a bit more of a... view full answer...
The Replacement Table Leg Kit for etrailer RV Dinette Tables part # e69RR is made of steel and has a black painted finish. It's designed for use indoors but the painted finish would provide protection from the elements if used outdoors. That's about as much as I can say for alternative applications. view full answer...
There are no numbers or letters dedicated to each pin on the 3-Wire Y-Adapter for Peterson Trailer Tail Lights part # 421-491Y. In basic use these will only plug in one way into the light they are designed to fit like the Peterson LumenX LED Trailer Tail Light part # M821R-7. view full answer...
The Towed Vehicle Battery Charge Wire Kit for Demco Supplemental Braking Systems # DM66VR uses a 14 gauge wiring. The ground wiring should be 12 or 14 gauge.
I attached a review video link below. view full answer...
Your 2006 Keystone Montana 3000RK was not pre-wired for a backup camera. You will need to either capture constant 12V power for the observation camera from the running light circuit or you can capture power from just the reverse light for use only when vehicle is shifted into reverse.
I don't have a wiring schematic for your trailer, but I recommend capturing the running light power from the license plate light to power your backup camera. You can use the circuit tester # PTW2993 to... view full answer...
Your tow package port on your 2005 Toyota Tundra will either be above the emergency brake pedal (even taped to it), or behind the kick plate panel to the left of the emergency brake pedal. The connector should be white. See the installation video on the 2006 Toyota Tundra I included as it will be the closest to your truck.
If you don't have a brake controller yet, I highly recommend going with the Tekonsha P3 # 90195 because its one of the most popular and highest rated brake controllers... view full answer...
Go To Results